PicoSearch

Audio Converter

Balanced to Unbalanced Audio Converter

The AC200 audio line converter is used to convert balanced (3 pin XLR connector) audio signals in professional audio equipment to the unbalanced (RCA connector) mode used in most domestic products. It is designed to broadcast specifications having very low noise and distortion with a flat amplitude response. The high common mode rejection characteristic at the input of the amplifier ensures that any noise and hum induced into the balanced line is almost completely eliminated.

Features and Specs:

  • Input: 2 x XLR 3 pin Female +4dBm into 600 ohms
  • Input Impedance: Bridging 50K ohm or Switched 600 ohm
  • Maximum Input: ~ +22dBm
  • Common Mode Rejection: Typically 100dB at DC, 70dB at 20KHz
  • Output: 2 x RCA -10dBv nominal into 47K ohms
  • Mono/Stereo: Switched Stereo to Mono output
  • Frequency Response: 10Hz - 100KHz ±0.1dB
  • Distortion: < -85dB at 1KHz ref -10dBv output
  • Noise: < -85dB 22Hz - 22KHz ref -10dBv output
  • Gain: Zero signal to ~ +10dB 10 turn control
  • Power: IEC Inlet, 3 Watts, 230 or 115 VAC 50/60 Hz
  • Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
  • Dimensions: 142(w) x 42(h) x 153(d) heavy duty aluminium extrusion
  • Rack Mounting: Optional RF300 takes three to a 1RU frame
  • Finish: Black Powder coated satin front and rear, stipple case
  • Weight: 850g plus packaging
Audio Converter

Larger image