PicoSearch

audio distribution amplifier

Six Output Balanced Stereo Audio Distribution Amplifier

The ADA600 Balanced Audio Distribution Amplifier provides broadcast quality distribution to six stereo outputs. It has a very low noise and distortion and less than 0.5dB amplitude variation over a 10Hz to 30KHz operating range. Each line output has it’s own driver amplifier which provides up to +24dBm of audio drive. Excellent isolation is provided between all outputs which have a low 44ohm line output impedance.

Features and Specs:

  • Input: Bridging XLR Stereo, 600 ohm switchable
  • Output: DB25 Female. 6 x Stereo Nominal +4dBm operation
  • Output Impedance: 44 ohms to drive 600 ohm loads
  • Noise : 22Hz - 22kHz UNWTD Typical -89dB Ref +4dBm
  • Distortion: At 1kHz -85dB Typical Ref +4dBm
  • Frequency Response: 20Hz - 100KHz +/- 0.2dB
  • Input Clipping Level: Typically +22dBm
  • Gain: Adjustable -8dB to +20dB
  • Common Mode Rejection: ~100dB DC - 60Hz, ~70dB at 20KHz
  • Power: IEC Inlet, 3 Watts max, 230 or 115 VAC 50/60 Hz
  • Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
  • Dimensions: 142(w) x 42(h) x 153(d) heavy duty aluminium extrusion
  • Rack Mounting: Optional RF300 takes three to a 1RU frame
  • Finish: Black Powder coated satin front and rear, stipple case
  • Weight: 750g plus packaging
balanced audio distribution amplifier

Larger image