PicoSearch

audio Distribution amplifier

Eight Output Balanced Stereo Audio Distribution Amplifier

The ADA800 Balanced Audio Distribution Amplifier achieves a higher specification than it’s ADA600 counterpart and provides broadcast quality distribution to eight stereo outputs. It has a very low noise and distortion and less than 0.2dB amplitude variation over a 12Hz to 50KHz operating range. Each line output has it’s own driver amplifier which provides up to +24dBm of audio drive. Excellent isolation is provided between all outputs which has < 50ohm line output impedance.

Features and Specs:

  • Input: Female XLR5 Stereo Bridging, 600 ohm switchable
  • Output: Male XLR5 Stereo 6 x Stereo Nominal +4dBm
  • Output Impedance: <50 ohms to drive 600 ohm loads
  • Noise : 22Hz - 22kHz UNWTD Typical -89dB Ref +4dBm
  • Distortion THD: At 1kHz -85dB Typical Ref +4dBm
  • Frequency Response: 20Hz - 50KHz +/- 0.2dB
  • Crosstalk: 80dB at 15KHz
  • Maximum Input Level: +24dBm
  • Gain: Adjustable -6dB to +6dB
  • Common Mode Rejection: ~80dB
  • Power: IEC Inlet, 10 Watts max, 230 or 115 VAC 50/60 Hz
  • Fuse: Delay type 80mA for 230VAC, 100mA for 115VAC
  • Dimensions: 1RU aluminium case 483(w) x 44(h) x 120(d)
  • Finish: Black Powder coated satin front and rear, stipple case
  • Weight: 1Kg plus packaging
8 output distribution amplifier

Larger image