Broadcast Performance Dual Microphone Pre-amplifier with 24V Phantom Power

This microphone preamplifier converts two balanced microphone level inputs intoto two line level outputs and features adjustable gain on each input. Also supplied with phantom power which means you can operate your choice of Dynamic or Electret Microphones.

Features and Specs:

• Input: 2 x Balanced XLR -65 to -35 input level, 200 - 1K ohm
• Output: 2 x Balanced 6.35mm Stereo Jacks, 600 ohm load,
• Nominal +4dBm. Unbalanced output possible.
• Response: 20Hz - 20KHz ± 1dB
• Distortion: Better than 70dB below +4dBu, -45dB input level
• Noise figure: less than 2.5
• Headroom: Above +4dBm ~ 20dB
• Phantom : ~24 volts DC pins 2, 3 with pin 1 common
• Rack Mounting: Optional RF300 takes three to a 1RU frame
• Finish: Black Powder coated satin front and rear, stipple case
• Power: IEC Inlet, 3 Watts, 230 or 115 VAC 50/60 Hz
• Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
• Dimensions: 142(w) x 42(h) x 133(d)
• Weight: 750g plus packaging