PicoSearch

video distribution amplifier

Six Output SVHS Video Distribution Amplifier

The SVDA600 takes 1 SVHS video input and amplifies it to six SVHS video outputs. It can be used for super high quality broadcasting, security, CCTV, SVHS video dubbing and other SVHS video distribution. The input S-Video is terminated in 75 ohms inside the SVDA600. Any small variations in Y or C level can be compensated for by adjustment of the gain controls. All outputs are amplified and may feed any standard S-Video circuit that is terminated in a 75 ohm load (this is usually inside the unit). This will provide 1 volt of Y and C to that circuit.

Features and Specs:

  • Input: 1 x 4pin Mini DIN, 1 Volt P-P into 75 ohm.
  • Output: 6 x 4pin Mini DIN, 1 Volt P-P into 75 ohm
  • Diff Gain and Phase: <0.1% and 0.1°
  • Frequency Response: DC - 30MHz ±0.5dB, DC coupled
  • Y Gain: -1 to +1.5dB
  • C Gain: -1 to +1.5dB
  • Power: IEC Inlet, 3 Watts, 230 or 115 VAC 50/60 Hz
  • Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
  • Dimensions: 142(w) x 42(h) x 153(d) heavy duty aluminium extrusion
  • Rack Mounting: Optional RF300 takes three to a 1RU frame
  • Finish: Black Powder coated satin front and rear, stipple case
  • Weight: 900g plus packaging
SVHS video distribution amplifier

Larger image