Ten input Video and Stereo Auto Scanning Switcher

Designed to assist in the quality control of duplicated video tapes by monitoring the video and audio output from each tape machine. It shows that each recorder is obtaining both audio and video signals during the recording process. Should a machine be playing and not recording or fail it can be immediately identified. When spot checks are made after recording, the switcher automatically switches between all transports enabling rapid quality checks to be made of all ten recordings. Up to 10 videotape machines can be viewed on a single screen and monitored automatically using the VASS10 scanning function. The operator can also set the scan rate of the switching between 0.5sec and 30sec intervals. It can also be used as a manual switcher. Dubbing houses can link multiple switchers to quality control literally hundreds of machines quickly and efficiently. The VASS10 makes an ideal companion to the VADA1010 or VADA1023

Features and Specs:

Video

• Input: 10 x RCA 1 Volt P-P terminated 75 ohm, DC Coupled
• Output: 2 x RCA 1 Volt P-P into 75 ohm, DC Coupled
• Diff Gain and Phase: < 1.0% and 1.0 °
• Frequency Response: > 5.0MHz

• Input: 10 x RCA Stereo, Nominal -10dBv operation
• Output: 2 x RCA Stereo Nominal -10dBv operation
• Noise and Distortion: < -75dB below -10dBv
• Frequency Response: 15Hz - 50KHz ±3.0dB
• Gain: Preset to unity

• Remote Port: TTL compatible remote switching and multiple unit interfacing

• Power: IEC Inlet, 3 Watts, 230 or 115 VAC 50/60 Hz
• Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
• Dimensions: 1RU aluminium case 483(w) x 44(h) x 120(d)
• Finish: Black Powder coated satin front and rear, stipple case
• Weight: 1.0kg plus packaging