Ten Output Video Distribution Amplifier

The VDA10 is ideal for larger dubbing or distribution systems. Provided with loop through input connectors, one of which can be terminated with a 75 ohm terminator rear panel switch when used as a stand-alone product. Ten output connectors to the right of the input connectors feed the inputs of each VHS recorder or other destinations as required. The amplifier is factory preset to give one volt of video out for one volt of video in. Recessed front panel gain and equalisation adjustments can be made to compensate for cable losses leading up to the amplifier. Front panel LED’s indicate that video is present during operation.

Features and Specs:

• Input: Looping BNC 1 Volt P-P, AC coupled, 75 ohm switch provided
• Output: 10 x BNC 1 Volt P-P into 75 ohm, DC Coupled
• Diff Gain and Phase: < 0.2% and 0.5 °
• Frequency Response: > 70MHz
• Gain: Preset front panel adjustment
• Equalisation: Preset front panel adjustment for ~ 200 mtrs RG59BU cable
• Video Presence: A LED indicates nominal 1 volts video presence
• Power: IEC Inlet, 10 Watts, 230 or 115 VAC 50/60 Hz
• Fuse: Delay type 50mA for 230VAC, 80mA for 115VAC
• Dimensions: 1RU aluminium case 483(w) x 44(h) x 120(d)
• Finish: Black Powder coated satin front and rear, stipple case
• Weight: 1.2kg plus packaging