3 Output Video Distribution Amplifier

Ideal for three way monitoring CCTV, and security applications. A broadcast performance amplifier that has excellent common mode rejection and uses an internal power supply. Ideal for every AV toolkit. The input connector is a single 75 ohm terminating BNC type. The outer terminal of the input BNC connector is not directly connected to ground. This allows hum and noise cancellation on the incoming signal. Up to 2 volts of noise can be virtually eliminated from the video picture. This is known as the rejection of Common Mode signals or Common Mode Rejection Ratio (CMRR). Maximum common mode rejection range is approximately ten volts peak to peak.

Features and Specs:

• Input: BNC 1 Volt P-P into 75 ohm, AC Coupled
• Output: 3 x BNC 1 Volt P-P into 75 ohm, DC coupled
• Diff Gain and Phase: < 0.1% and 0.1 °
• Frequency Response: > 30MHz
• Input CMRR: 50dB typical, no adjustment
• Gain: Unity - No internal adjustments
• Video Clamp: Not provided
• Power: IEC Inlet, 3 Watts, 230 or 115 VAC 50/60 Hz
• Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
• Dimensions: 142(w) x 42(h) x 153(d) heavy duty aluminium extrusion
• Rack Mounting: Optional RF300 takes three to a 1RU frame
• Finish: Black Powder coated satin front and rear, stipple case
• Weight: 750g plus packaging