Eight Input Vertical Interval Video Switcher

The VS850 allows eight video sources to be switched to a single output. Vertical Interval switching is possible with synchronous signals thus avoiding picture roll or VCR disturbance when switching occurs. Also featuring Last Selection Memory. Should a power failure or interrupt occur, the switcher will resume on the last selected switch This switcher can be programmed to automatically scroll though inputs at user selectable 1, 3, 10 and 20 second intervals. Select any group of channels to scan and skip unselected channels. (Remote control can be either relay closure or RS232.)

Features and Specs:

• Frequency Response: Video DC - 50MHz ±0.5dB, DC coupled
• Diff Gain and Phase: <0.5% and 0.5° respectfully
• Gain: Unity
• Inputs : 8 x BNC 1 volt PAL or NTSC
• Input Impedance : 75 ohm
• Cross Talk : < 60dB
• Output : 1 volt into 75 ohm BNC
• Remote control : on D9 Connector
• Diff Phase : < 0.1
• Diff Gain : < 0.1%
• Power: IEC Inlet, 3 Watts, 230 or 115 VAC 50/60 Hz
• Fuse: Delay type 32mA for 230VAC, 80mA for 115VAC
• Dimensions: 142(w) x 42(h) x 135(d) heavy duty aluminium extrusion
• Rack Mounting: Optional RF300 takes three to a 1RU frame
• Finish: Black Powder coated satin front and rear, stipple case
• Weight: 750g plus packaging