Overview of this User Manual
Use this manual to learn how to:
•Connect the codec to an IP network and configure peer-to-peer, multicast or multi-unicast connections.
•Configure the codec over a LAN or USB cable.
•Adjust audio and other settings within the codec.
•Configure automatic SDHC card backup.
Please read Getting Connected Quickly for an overview of how to configure the codec using 'programs' to store connection settings.
Manual Conventions
|
Warnings: Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. |
|
Cautions: Instructions warning against potential hazards, or to detail practices that must be observed for safe operation and to prevent damage to equipment or personnel. |
|
Important Note: Information you should know to connect and operate your codec successfully. |
Typographic Conventions
•Codec software elements are in Arial bold, e.g. Contacts
•Codec hardware elements are in bold Capitals, e.g. KEYPAD
Help Button
Press the 
(information/help) button on the codec when navigating codec menus to display a help dialog on the LCD screen suggesting actions which can be performed from the current menu item.
