The codec features a front panel lock feature for tamper-proof operation. This feature is disabled by default.

 

There are two levels of panel lock and each requires a user to enter a PIN to access different features:

 

1.Admin PIN: Required to change codec connection or configuration settings accessed via the SETTINGS button. (Default PIN is: 456789)

2.User PIN: Required to use the codec front panel buttons and dial/hangup a connection (Default PIN is: 123456)

 

Enabling the Front Panel Lock Feature

1.Press the SETTINGS button.

2.Navigate to System and press .

3.Navigate to Auto Lock and press to toggle from Disabled to Enabled.

 

 

4.Navigate down to the panel Lock Timeout field and press to enter the desired time-out period in seconds. Note: The time-out period is the time in seconds before the codec front panel is relocked after being used.

 

5.If you want to change the default Admin PIN or User PIN, navigate down to each in turn and press to enter a new PIN.