Multiple Connections within Programs

Multi-unicast programs allow you to simultaneously transmit a mono or stereo audio stream to up to 6 destination codecs. Multi-unicast programs can only be created using the HTML5 Toolbox web-GUI. There are two ways to simultaneously dial multiple IP audio stream connections multi-unicast programs:

 

1.Load the program into the codec via the front panel and dial.

2.Connect to the codec using the Toolbox HTML web-GUI and use the Program Loader panel to load the program and then use the Connections panel to connect.

 

Dialing Multiple Connections via the Front Panel

1.Press the HOME button to return to the Home screen.

2.Use the navigation buttons to select Programs and press the button.

3.Use the up and down navigation buttons to select the multi-unicast program you want to connect with, then press the CONNECT button to make a connection.

4.The Wait Connecting screen appears briefly and then the Home screen is displayed.

 

It is also possible to redial the connection.

 

Disconnect All Connections

1.Press the red DISCONNECT button on the numeric KEYPAD at any time to hangup all connections.

2.Use the right navigation button to select Yes and press the DISCONNECT button or the button to confirm the disconnection.

 

Disconnecting Individual Multi-unicast Connections

It is only possible to disconnect individual connections via the Connections panel in the dialing codec's HTML5 Toolbox web-GUI.